Process description: AlNiCo magnets have different magnetic properties and different uses according to their metal composition. AlNiCo magnets have three different production processes: casting, sintering, and bonding. The casting process can be processed to produce different sizes The shape of the sintered product is limited to a small size, and the blank product produced by it has small dimensional tolerances and good casting workability. Among the permanent magnet materials, the cast aluminum nickel cobalt permanent magnet has the lowest reversible temperature coefficient, and the working temperature can be as high as 500 Above Celsius.

  Uses: AlNiCo magnet has strong resistance to corrosion and oxidation,many industrial and consumer products need strong permanent magnets, such as electric motors, electric guitar pickups, microphones, sensors, speakers, traveling wave tubes, cow magnets, etc., these products can use AlNiCo magnet.

   Remarks: AlNiCo magnet has a high magnetic energy product and a very low temperature coefficient. The maximum operating temperature can reach 350℃, and the negative temperature is not limited. When the operating temperature is above 180℃, its maximum magnetic energy product (BHmax), coercivity, temperature stability and chemistry The stability is higher than that of NdFeB permanent magnet materials.

FAQ

1. When can I get the price?

Usually you need to send below information, we will quote within 12 hours after we get it.
1) For customization : material, grade, size, plating layer, tolerance requirements, magnetization direction, quantity, etc.

2. Can you help with the design?

Yes, 5 professional designers to help with simple information such as logo and some images .

3.Shall I need to prove the brand ownership ?

Normally, you need to supply a copy of brand authorization to us when you place an order. Otherwise, all pictures with brands which were mentioned in this artical are just for reference, the trademark right is belong to our clients.

4. How long can I expect to get the sample?

After you pay the sample charge and send us confirmed files, the samples will be ready in 3-5 days. The samples will be sent to you via express and arrived in 10 days.

5. What about the lead time for mass production?

Honestly, it depends on the order quantity and the season you place the order.
Generally speaking, we suggest that you start to inquire two months before the date you would like to get the products at your country.

We are pleasure to draw graphic design for you! AI, PDF or JPEG format artwork are welcome! Any questions pls send emails to us!